There are a lot of troubleshooting problems that can occur with your refrigerator. Some of them include door seals not making full contact with the edges of the fridge, light not working and overflowing of the ice maker. If you are experiencing any of these, then you need to make sure you fix it right away.
Light doesn't work
It's not uncommon to experience a problem with your refrigerator's light. Luckily, this type of problem is generally simple to fix, requiring minimal effort on your part.
First, you'll want to check to make sure that you've got an adequate power supply. This can be done by plugging the appliance into the correct outlet receptacle.
Once you have determined that you have a working power source, you'll need to verify that you've got the proper circuit breaker in place. You may need to call an electrician to confirm this.
Next, you'll need to make sure that you've got the right light bulb for your model. There are many different types to choose from. If you need to get a replacement, you may be able to find one online or at a local home improvement store.
Ice in the freezer vents
A refrigerator with ice in the freezer vents is not necessarily a sign of a faulty refrigerator. There are a few ways to remove ice from your fridge and keep it clean. Some appliances are equipped with a defrost system. You can also use a blow dryer to melt ice.
The most important step in preventing ice in the freezer vents is to maintain proper air flow through your refrigerator. Cool air should enter through the door and exit through the vents. If any of these are blocked, the cold air can't make it into the unit. This can cause an uncomfortably cold freezer.
Often, a faulty freezer door seal is the culprit. A bad seal allows outside air to get into the fridge and cause ice to form. When the door is closed properly, ice is not able to form.
Evaporator fan causes a humming noise in the freezer vents
If you've noticed a loud humming noise coming from your freezer vents, you may need to check the evaporator fan. The fan helps to move cool air from the freezer to the fresh food compartment. This can become noisy if the motor or blades on the evaporator fan are damaged or obstructed.
It is best to get professional help when troubleshooting your refrigerator if the humming is too loud, or if you are not experienced with repairing your appliance. An expert can perform an assessment to find out what the problem is and can fix it for you.
One common cause of a Sub-Zero refrigerator's humming is ice buildup on the evaporator fan blade. Ice on the fan blade may prevent it from turning. You can manually defrost the evaporator fan or replace the fan with a new one.
Door seals don't make full contact with the edges of the fridge
If your Certified Refrigerator Troubleshooting Experts is sticking, you can fix it by using the proper lubricant. You can either apply petroleum jelly or a silicone spray. The trick is to put it into the groove underneath the loose rubber.
Your fridge's door seal is the component responsible for retaining cold air and fresh air. A gasket is the strip of rubber that goes into the groove of the door. When closed, it seals the door tightly. However, this seal can become damaged.
You should check your door seal on a regular basis. If you notice a gap, a hole, or a squiggly seal, it may be time to replace it. It's easy to do yourself, but you will need a few tools.
First, you will need to remove the old door seal. You can do this with a hex-head nut screwdriver. You'll want to be careful not to overtighten the screws.
Overflowing of the ice maker
If you have a refrigerator that is overflowing with ice, it is important to find the cause of the problem. A plumber can help you diagnose the issue and fix it.
Ice makers are designed to work with a specific water pressure level. This helps control how much ice is made. If the water pressure is too low, it can cause your ice maker to overflow. To remedy the issue, increase the water pressure.
Another common reason for overflowing ice makers is mineral buildup. Keeping your plumbing clean will prevent this from happening.
In addition to water pressure, a defective water inlet valve can also cause an overflow. The water inlet valve regulates the flow of water into the ice maker. It is usually located at the back of the refrigerator.
Comments